Analysis of organic acids and inorganic anions in beverage drinks by capillary electrophoresis

To meet the need for a new and validated analytical method for simultaneous determination of inorganic and organic acid anions in beverage drinks, a capillary zone electrophoresis (CZE) procedure had been developed based on a new background electrolyte (BGE) system containing 3 mmol/L 1,3,5-benzenetricarboxylic acid (BTA), 15 mmol/L tris(hydroxymethyl)aminomethane and 1.5 mmol/L tetraethylenepentamine (TEPA) at pH 8.4. Baseline separation of anions commonly found in beverage drinks could be achieved in less than 14 min with indirect UV detection at 240 nm. Comigration problems for hydroxycarboxylic acids could be solved using TEPA as BGE additive. The results indicate excellent repeatability for migration time (RSD, 0.27-0.67%, n = 5) and good precision for both peak height (RSD, 3.2-4.2%, n = 5) and peak area (RSD, 3.1-4.5%, n = 5). Under the optimized conditions and using corrected peak area for quantitation, an excellent linear dynamic range (with correlation coefficient > 0.997 in a concentration range from 0.005 to 2.0 mmol/L) and low detection limit (1-4 micro mol/L) were obtained for all the anions investigated. The applicability and reliability of the CE procedure developed were established by parallel method determination using established ion chromatography procedure for the analysis of inorganic and organic acid anions in orange juice and wine samples. Our CZE procedure provided a sensitive and economic technique for simultaneous determination of inorganic and organic acid anions in orange juice, red and white wine samples.     

HO2 ELIMINATION FROM α-HYDROXYALKYLPEROXYL RADICALS IN AQUEOUS SOLUTION

Abstract— In aqueous solutions α-hydroxyalkylperoxyl radicals undergo a spontaneous and a base catalysed HO₂ elimination. From kinetic deuterium isotope effects, temperature dependence, and the influence of solvent polarity it was concluded that the spontaneous reaction occurs via an HO₂ elimination followed by the dissociation of the latter into H⁺ and O₂^-. The rate constant of the spontaneous HO₂ elimination increases with increasing methyl substitution in α-position ( k (CH₂(OH)O₂) < 10s^-1 k (CH₃CH(OH)O₂) = 52s^-1 k ((CH₃)₂C(OH)O₂) = 665 s^-1). The OH^- catalysed reaction is somewhat below diffusion controlled. The mixture of peroxyl radicals derived from polyhydric alcohols eliminate HO₂ at two different rates. Possible reasons for this behaviour are discussed. The mixture of the six peroxyl radicals derived from d -glucose are observed to eliminate HO₂ with at least three different rates. The fastest rate is attributed to the HO₂ elimination from the peroxyl radical at C-l ( k > 7000s^-1). Because of the HO₂ eliminations the peroxyl radicals derived from d -glucose do not undergo a chain reaction in contrast to peroxyl radicals not containing an α-OH group. In competition with the first order elimination reactions the α-hydroxylalkylperoxyl radicals undergo a bimolecular decay. These reactions are briefly discussed.     

Direct aziridination of alkenes by a cationic (salen)ruthenium(VI) nitrido complex

[RuVI(N)(salchda)(CH3OH)]PF6 (1) (salchda = N,N'-bis(salicylidene)o-cyclohexyldiamine dianion) reacts readily with 2,3-dimethyl-2-butene at room temperature in the presence of pyridine or 1-methylimidazole to give initially [RuIV(Az1(-H))(salchda)(py)]PF6 (2, Az1 = 2,2,3,3-tetramethylaziridine), which is then slowly reduced to [RuIII(Az1)(salchda)(py)]PF6 (3). 1 also reacts with a variety of aryl-substituted alkenes such as styrene and trans-beta-methylstyrene in the presence of py or 1-MeIm to give the corresponding ruthenium(III) aziridine complexes. The structures of 3 and [RuIII(Az2)(salchda)(1-MeIm)]PF6 (4, Az2 = trans-2-methyl-3-phenylaziridine) have been determined by X-ray crystallography. The Ru-N(aziridine) distances (2.1049, 2.097 A) are consistent with a neutral aziridine ligand. The C-C and C-N distances in the aziridine ligands are all indicative of single bonds.     

Synthesis and electronic characterization of bipyridine dithiolate rhodium(III) complexes

Five new mixed diimine 1,1'-dithiolate or dithiocarbamate ligand complexes of the form [Rh(bpy)2(SS)][PF6]n, where bpy = 2,2'-bipyridine and SS = various substituted dialkyldithiocarbamates or 1,1'-dithiolates, were synthesized from cis-[Rh(bpy)2(OTf)2][OTf]. The triflate ligands are easily displaced by other ligands and allow these syntheses to proceed in high yields (80-90% overall) under relatively mild reaction conditions and to give high purity products. Electrochemistry shows irreversible two-electron reduction of Rh(III) to Rh(I) and a concomitant loss of one bipyridine ligand; this is followed by reversible one-electron reduction of the remaining 2,2'-bipyridine ligand. The electronic characterizations of these complexes are consistent with significant delocalization of the sulfur electron density onto the empty metal d orbitals. The 1,1'-dithiolate ligands induce larger red shifts in the absorption and emission spectra than the dithiocarbamates as the 1,1'-dithiolates have a more extensive conjugation system.     

An intraindividual study of the characteristics of erythema induced by bath and oral methoxsalen photochemotherapy and narrowband ultraviolet B

We compared the characteristics of psoralen and ultraviolet A (PUVA) erythema in skin photosensitized by bath or oral methoxsalen in 20 subjects. Erythema was assessed visually and with a reflectance instrument at 24 h intervals for 7 days. In addition, narrowband ultraviolet B (TL-01 UVB) erythema was examined in 19 of these subjects at 4, 8, 12, 24, 48 and 72 h and in another nine subjects at 12, 15, 18, 21 and 24 h. Both bath and oral PUVA exhibited broad erythemal peaks beyond 72 h. For topical PUVA the lowest minimal phototoxic dose (MPD) occurred at 120 and 144 h (P = 0.01 and 0.03 compared with 72 h). Oral PUVA erythema peaked earlier at 96 h: the MPD was significantly lower at 96, 120 and 144 h compared with 72 h (P = 0.001, 0.01 and 0.02, respectively). At 120 h, bath PUVA had a significantly steeper slope compared with oral PUVA. The TL-01 UVB minimal erythema dose was significantly lower at 12 h compared with 24 h (P = 0.019). The majority of subjects were at maximal erythema at 12 h (22 of 28) and 15 h (eight of nine). Our results suggest that peak erythema for bath PUVA, oral PUVA and TL-01 UVB occurs at 120, 96 and 12-15 h, respectively.     

Polyvinyl pyridines as flocculating agents

Summary High molecular weight poly 2- and 4-vinyl pyridines were synthesized by ionic polymerisation and their flocculation efficiency tested against kaolin and silica dispersions at pH 3. Low additions of the polymers, around 3 parts per 10₃ parts solid, destabilize the dispersions and clarify silica dispersions to a remarkable extent; however, over-addition of polymer leads to partial restabilization. The flocculation efficiency improves with increase of solids content, especially with clay dispersions. Flocculation efficiency increases with polymer molecular weight, especially over the lower part of the range covered, but is relatively independent of pH in the range 2–4. Quaternization of poly(4-vinyl pyridine) with bromobutane produces a good flocculant for aqueous silica dispersions in which the degree of restabilization on over-dosing depends on the KCI content. TheN-oxide derivatives of the vinyl pyridine polymers do not affect the colloidal stability of silica dispersions. The observations are interpreted in terms of bridging flocculation by the cationic polymer molecules between anionic surface sites on the solid particles.     

Ultrathin polymer film formation by collision-induced cross-linking of adsorbed organic molecules with hyperthermal protons

A new synthetic approach for the formation of ultrathin polymer films with customizable properties was developed. In this approach, the kinematic nature of proton collisions with simple organic molecules condensed on a substrate is exploited to break C-H bonds preferentially. The subsequent recombination of carbon radicals gives a cross-linked polymer thin film, and the selectivity of C-H cleavage preserves the chemical functionalities of the precursor molecules. The nature and validity of the method are exemplified with theoretical results from ab initio molecular dynamics calculations and experimental evidence from a variety of characterization techniques. Its applicability is demonstrated by the synthesis of ultrathin polymer films with precursor molecules such as dotriacontane, docosanoic acid, poly(acrylic acid) oligomer, and polyisoprene. The approach is fundamentally different from conventional chemical synthesis as it involves an unusual mix of physical and chemical processes including charge exchange, projectile penetration, kinematics, collision-induced dissociation, inelastic energy transfer, chain transfer, and chain cross-linking.     

Reversible replication between ordered mesoporous silica and mesoporous carbon

Highly ordered mesoporous silica can be regenerated from a mesoporous carbon CMK-3 that is a negative replica of mesoporous silica SBA-15, indicating reversible replication between carbon and inorganic materials.     

Radioactivity contents in building materials used in Hong Kong

The radioactivity contents in building materials used in Hong Kong were measured to determine the sources of the high indoor radon concentrations observed in local buildings. The radium contents and the radon emanation coefficients of different building materials were measured by high resolution γ-ray spectroscopy using germanium detectors. The radon exhalation rates were measured using scintillation cells by circulating the exhaled radon from building materials and obtaining the initial growth rates. The radium content and the radon exhalation rates of concrete and bricks used in Hong Kong were found to be higher than those in some other countries, resulting in high indoor radon concentrations probably due to the high radioactivity contents in the aggregates, granitic in nature, used in building materials.     

High levels of soluble herpes virus entry mediator in sera of patients with allergic and autoimmune diseases

Herpes virus entry mediator (HVEM) is a newly discovered member of the tumor necrosis factor receptor (TNFR) superfamily that has a role in herpes simplex virus entry, in T cell activation and in tumor immunity. We generated mAb against HVEM and detected soluble HVEM (SHVEM) in the sera of patients with various autoimmune diseases. HVEM was constitutively expressed on CD4(+) and CD8(+) T cells, CD19(+) B cells, CD14(+) monocytes, neutrophils and dendritic cells. In three-way MLR, mAb 122 and 139 were agonists and mAb 108 had blocking activity. An ELISA was developed to detect sHVEM in patient sera. sHVEM levels were elevated in sera of patients with allergic asthma, atopic dermatitis and rheumatoid arthritis. The mAbs discussed here may be useful for studies of the role of HVEM in immune responses. Detection of soluble HVEM might have diagnostic and prognostic value in certain immunological disorders.